Availability: Available for Order
*Delivery times may be affected
Vented Outback 3500W Battery Backup Inverter is designed to handle high ambient temperatures while providing automatic grid connectivity and reliable back up power. Model# GTFX3524
The OutBack G-Series inverters are the grid-interactive versions in OutBack’s FX inverter line. Available in either sealed (GTFX) or vented (GVFX) models, these inverters allow you to sell solar, wind, and/or hydro power back to the utility grid. If the utility power goes down, the inverter will automatically switch to battery power and your renewable energy source(s) to run your critical loads. The inverter can be set up so that either utility power, or your renewable source, can be used to recharge the battery bank after an outage. AC power is seamlessly switched between utility and battery power through the inverter’s built-in 60A transfer switch.
With the OutBack grid-interactive system, backup AC power is made available 24 hours a day in the event of a utility outage, providing reliable power and peace of mind. At night, the inverter's automatic power save mode ensures that energy is not wasted by needlessly charging your batteries from the utility grid. Daily energy production efficiency is within a few percentage points of battery less grid-inverter systems (depending on the condition of the battery bank). Up to two grid-interactive FXs can be combined and wired or “stacked” for 120/240V output. The Grid-Tie FX Series Inverter/Chargers can be stacked in Classic Series only, which is limited to two grid-interactive FXs.
The X-240 autotransformer (FW-X240) can be used to step-up the AC output of a single Grid-Interactive FX system from 120VAC to 240VAC. Note that the FW-X240 Auto Transformer cannot be used for stacking with a Grid-Interactive FX system.
These inverters are not recommended for exclusive off-grid use. For exclusively off-grid units see our off-grid inverter models.
Up to ten inverters can be connected together to provide up to 36 kW of continuous power capacity with the use of the HUB and the MATE controller. The inverter’s powerful battery charger operates in five stages: BULK (constant current output), ABSORB (constant voltage output), FLOAT (reduced voltage output), SILENT (no charger output) and EQUALIZE (constant voltage regulation overcharging). Charge time in each stage is adjustable to provide control and to maximize the performance of the charger and battery system. The MATE controller is required to program the inverter.
ETL Listed to UL 1741. Standard 2-year warranty with an available 5-year extended warranty.
Model #: GTFX3524
|Sealed Models ||Vented Models |
|GTFX2524 ||GTFX3048 ||GVFX3524 ||GVFX3648 |
|Nominal DC Input Voltage ||24 VDC ||48 VDC ||24 VDC ||48 VDC |
|Continuous Power Rating at 25° C ||2500 VA ||3000 VA ||3500 VA ||3600 VA |
|AC Voltage/Frequency ||120 VAC 60 Hz ||120 VAC 60 Hz ||120 VAC 60 Hz ||120 VAC 60 Hz |
|Continuous AC RMS Output at 25° C ||20.8 amps AC ||25.0 amps AC ||29.2 amps AC ||30.0 amps AC |
|Full Idle Power ||≈ 20 Watts ||≈ 20 Watts ||≈ 20 Watts ||≈ 20 Watts |
|Search ||≈ 6 Watts ||≈ 6 Watts ||≈ 6 Watts ||≈ 6 Watts |
|Typical Efficiency ||92% ||93% ||92% ||93% |
|Inverting Total Harmonic Distortion ||2% ||2% ||2% ||2% |
|Selling ||5% ||5% ||5% ||5% |
|Output Voltage Regulation ||± 2% ||± 2% ||± 2% ||± 2% |
|Peak Maximum Output Current ||70 amps AC ||70 amps AC ||70 amps AC ||70 amps AC |
|RMS ||50 amps AC ||50 amps AC ||50 amps AC ||50 amps AC |
|Surge AC Overload Capability ||6000 VA ||6000 VA ||6000 VA ||6000 VA |
|5 Second ||4800 VA ||4800 VA ||5000 VA ||5000 VA |
|30 Minutes ||3200 VA ||3200 VA ||4000 VA ||4000 VA |
|AC Input Current Maximum ||60 amps AC ||60 amps AC ||60 amps AC ||60 amps AC |
|AC Input Voltage Range (MATE Adjustable) ||80 to 150 VAC ||80 to 150 VAC ||80 to 150 VAC ||80 to 150 VAC |
|AC Input Frequency Range ||58 to 62 Hz ||58 to 62 Hz ||58 to 62 Hz ||58 to 62 Hz |
|DC Input Range ||21.0 to 34.0 VDC ||42.0 to 68.0 VDC ||21.0 to 34.0 VDC ||42.0 to 68.0 VDC |
|Continuous Battery Charge Output ||55 amps DC ||35 amps DC ||85 amps DC ||45 amps DC |
|Warranty ||Standard 2 year / Optional 5 year ||Standard 2 year / Optional 5 year |
|Unit Weight ||56 lbs (25 kg) ||54 lbs (25 kg) |
|Shipping ||67 lbs (30 kg) ||62.2 lbs (28 kg) |
|Unit Dimensions (H x W x L) ||13 x 8.25 x 16.25" (33 x 21 x 41 cm) ||12 x 8.25 x 16.25" (30 x 21 x 41 cm) |
|Shipping ||21.75 x 13 x 22" (55 x 33 x 56 cm) ||21.75 x 13 x 22" (55 x 33 x 56 cm) |
This inverter can be easily installed and serviced by utilizing a 175A Outback E-panel
OutBack Installation Manual
OutBack Programing Manual