|
|
|
|
|
|
The high powered ventilated VFX version is a great choice in high ambient temperature applications or where generator-powered battery charging is an important part of system battery charging. This inverter/charger is a complete power conversion system – DC to AC inverter, battery charger and AC transfer switch. Additional inverter/chargers can be added at any time either in parallel (120VAC), series (120/240VAC), or even three-phase (120Y208 VAC) configurations, allowing the system to be tailored to the specific needs of the application, both at the time of installation and into the future.
With the addition of anX-240 autotransformer, multiple inverter systems can be set up to provide 120/240 VAC split-phase output with the ability to provide full power on either 120VAC leg of the system. Up to ten inverters can be connected together to provide up to 36 kW of continuous power capacity with the use of the HUB and the MATE controller. The inverter’s powerful battery charger operates in five stages: BULK (constant current output), ABSORB (constant voltage output), FLOAT (reduced voltage output), SILENT (no charger output) and EQUALIZE (constant voltage regulation overcharging). Charge time in each stage is adjustable to provide control and to maximize the performance of the charger and battery system.
Each OutBack inverter has a programmable, auxiliary relay output connection (AUX) that provides 12VDC output to run 12V cooling or ventilation fans or operate an external relay to perform other functions, such as remote generator starting (two-wire), to disconnect external charging sources (such as PV), or to turn on a diversion load for voltage regulation.
The transfer switch is rated for 60 amps. When an external source of AC power (either a generator or the utility grid) is detected at the “AC in” terminal on the inverter, the switch operates to transfer the loads to the external power source, and then activates the
battery charger to re-charge the battery bank.
ETL Listed to UL 1741. Standard 2-year warranty with an available 5-year extended warranty.
Specifications:
| | Vented Models | | VFX2812 | VFX3524 | VFX3648 | | Nominal DC Input Voltage | 12 VDC | 24 VDC | 48 VDC | | Continuous Power Rating at 25° C | 2800 VA | 3500 VA | 3600 VA | | AC Voltage/Frequency | 120 VAC 60 Hz | 120 VAC 60 Hz | 120 VAC 60 Hz | | Continuous AC RMS Output at 25° C | 23.3 amps AC | 29.2 amps AC | 30.0 amps AC | | Full Idle Power | ≈ 20 Watts | ≈ 20 Watts | ≈ 23 Watts | | Search | ≈ 6 Watts | ≈ 6 Watts | ≈ 6 Watts | | Typical Efficiency | 90% | 92% | 93% | | Typical Total Harmonic Distortion | 2% | 2% | 2% | | Maximum | 5% | 5% | 5% | | Output Voltage Regulation | ± 2% | ± 2% | ± 2% | | Peak Maximum Output Current | 56 amps AC | 70 amps AC | 70 amps AC | | RMS | 40 amps AC | 50 amps AC | 50 amps AC | | Surge AC Overload Capability | 4800 VA | 6000 VA | 6000 VA | | 5 Second | 4000 VA | 5000 VA | 5000 VA | | 30 Minutes | 3200 VA | 4000 VA | 4000 VA | | AC Input Current Maximum | 60 amps AC | 60 amps AC | 60 amps AC | | AC Input Voltage Range (MATE Adjustable) | 80 to 150 VAC | 80 to 150 VAC | 80 to 150 VAC | | AC Input Frequency Range | 54 to 66 Hz | 54 to 66 Hz | 54 to 66 Hz | | DC Input Voltage Range | 10.5 to 17.0 VDC | 21.0 to 34.0 VDC | 42.0 to 68.0 VDC | | Continuous Battery Charge Output | 125 amps DC | 85 amps DC | 45 amps DC | | Warranty | Standard 2 year / Optional 5 year | | Unit Weight | 54 lbs (25 kg) | | Shipping | 62.2 lbs (28 kg) | | Unit Dimensions (H x W x L) | 12 x 8.25 x 16.25" (30 x 21 x 41 cm) | | Shipping | 21.75 x 13 x 22" (55 x 33 x 56 cm) |
This inverter can be easily installed and serviced by utilizing a 175A Outback E-panel
Documents:
OutBack Installation Manual
OutBack Programing Manual |
|
|
|
|
|