|
|
|
Availability: Available for Order *Delivery times may be affected
The Classic MPPT Charge Controller - 250. A very versatile and feature rich charge controller rated for 250 volts input @ 63 amps. Preset configuration modes for Solar, Wind, and Hydro can extract 50-250% more power out of your resource.
Primary Features: - 250v operating voltage
- Max current out: 63 amps
- ETL listed to UL1741 and CSA
- 12-72V battery charging standard with models up to 120V battery bank
- Built in DC-GFP and Arc Fault Detector
- Solar, wind and hydro MPPT modes
- Ethernet, Wi-Fi, USB and RS232
- Remote and local displays possible
- 32 megs of data logging
- Snap on covers and hole plugs allow sealed or vented operation
- Can hook up wirelessly via Wi‐Fi bridge to communicate to an in house Wi‐Fi router
- Snow melting mode automatic or manual local or over the internet
- Get 50‐250% more power from hydro’s and wind turbines
Full Features: - HyperVOC mode (add the battery voltage to the operating voltage for VOC rating)
- Learning mode for Solar, Wind and Hydro
- User programmable for most all battery charging wind turbines (may require the Clipper)
- Built in String sizing program
- Suggested PV combiner and breaker model numbers depending on configuration selected
- Suggested wire size in AWG and Metric
- Built in Battery capacity sizing program
- Built in voltage drop calculator for PV wiring in AWG and Metric
- Knows when sun up and sundown are to take place anywhere in the world
- Ethernet jack calls out to the MidNite Server for free for secure data monitoring and logging
- Industry standard ModBus open architecture
- Arc fault detector reduces threat of fire
- Built in DC‐GFP without the hassle of fuses
- Graphics display panel can be removed and relocated (Dummy filler display available)
- USB port for uploading firmware updates and data logging to a PC or Mac
- Graphics display turns into an oscilloscope
- Battery voltage supported up to 72 for the Classic150, 200 and 250. 120 volts for Classic250KS
- Works with the MidNite Clipper for over‐speed control of wind turbines
- Two aux outputs: 1 dry contact relay and one 12v output/ input (anemometer)
- Voice prompts and help screens in English, Spanish and French
- Parallel operation to make one large controller out of many regular Classics
- Buck or Boost DC to DC converter operation available in
The Set-up Wizard walks you through: - Battery hook up
- PV array sizing and hook up
- Wind turbine program selection
- Wire sizing
- Breaker selection
- PV combiner selection
- Sunrise and sunset program set up
- Voltage drop calculations
- Ethernet, USB and RS232
- Remote and local displays possible
- 32 megs of data logging
| Classic150 | Classic200 | Classic250 | Classic250KS | Operating volts in | 150VDC | 200VDC | 250VDC | 250VDC | Max HyperVOC | 150+battery | 200+battery | 250+battery | 250+batteryV | Battery Charge V | 12‐93 | 12‐93 | 12‐93 | 12‐150 | Max current out | 96 amps | 79 amps | 63 amps | 40 amps | Environment | -40 to 40C | Dimensions of Classic | ‐14.87” x 5.95” x 4.00” / 378mm x 151mm x 102m | Dimensions of boxed | 19.0” x 8.5” x 5.7” / 483mm x 216mm x 145mm | Boxed weight | 12 lbs / 5.4 kg |
Classic Brochure Classic Users Manual

|
|
|
|
|